> The received wisdom suggests that Unix’s unusual combination of fork() and exec() for process creation was an inspired design. In this paper, we argue that fork was a clever hack for machines and programs of the 1970s that has long outlived its usefulness and is now a liability. We catalog the ways in which fork is a terrible abstraction for the modern programmer to use, describe how it compromises OS implementations, and propose alternatives.
> As the designers and implementers of operating systems, we should acknowledge that fork’s continued existence as a first-class OS primitive holds back systems research, and deprecate it. As educators, we should teach fork as a historical artifact, and not the first process creation mechanism students encounter.
> The received wisdom suggests that Unix’s unusual combination of fork() and exec() for process creation was an inspired design.
No, it was done that way so that you could launch a program that was too big to fit in memory with the parent program. The original implementation worked by swapping out the forking program to disk on a fork() call. Then, at the moment the program was swapped out but control had not returned, the process table entry was duplicated and adjusted so that there were now two processes, one in memory and one swapped out. The one in memory then got control, and could do an exec() call.
This allowed large programs to run on small PDP-11 machines. It was needed back in the era of really expensive memory. That's why.
The problem with fork isn't really that it's slow. The problem is that if you want it to be not-slow, it locks you into a bunch of OS design decisions: you more or less need a memory subsystem where all writable pages are refcounted and copy-on-write when the refcount is bigger than 1, and you need overcommit.
Now these decisions aren't objectively bad, but they have significant trade-offs and it's probably not a good idea that they're forced simply because we use fork()+exec() for process creation.
CoW is probably a good idea whether you use fork or not. Or rather, fork is probably a better option than just exec exactly because it can benefit from CoW.
At least on systems with virtual addressing. If you want to go into physical addressing, then yes, maybe it's a problem. But Linux will never touch anything with physical addressing, so I don't see what people are complaining about.
Didn't he just say that fork turns out to be comparatively faster to the non-fork samples we get? Ie Linux spawns processes faster than Microsoft's kernels?
Didn't I just say that "the problem with fork isn't really that it's slow"? It's all the other OS design choices it forces on you if you want it to be fast.
We don't have any broadly used non-fork samples. Windows, macOS, and Linux all have fork. So the presence of fork can't be the reason for the performance difference.
A more accurate way to describe this is that Windows' (NT onward) core execution context model is a bunch of threads that by default share memory, whereas Unixen have a core task context model of a bunch of threads that by default do not share memory.
Both systems are implemented using threads as the execution context, but in Unix, the history means that that you fork+exec most of the time, resulting in a two tasks that do not share memory any more. By contrast, on Windows (NT onward) the common case when creating a new execution context is to create a thread that shares memory with others in its process.
Both systems allow the easy use of the other's core abstraction. On Unix, you can either code like its 1986 and use fork without exec, or use clone(3) or any of its higher level abstractions like pthreads.
You're right that POSIX semantics get tangled when using threads.
Windows was designed with threads-first mentality because on pre-386 machines you don't have viable process memory protection, so your tasks share memory by necessity. This is not a great argument.
Windows NT was never designed with pre-386 machines in mind. That was the territory of the old DOS+Windows. Windows NT from the get-go was for machines with page-based virtual memory.
This is not true. NT never had fork, was always based on the assumption of an MMU and Dave Cutler was a well known fork hater in the 80s long before this paper came out and made it cool to be so. By the time Windows 95 was out, the baseline was 386 with an MMU. CreateThread was initially designed for NT in 1993 though (which didn’t support pre-386 CPUs).
As mentioned elsewhere on this page, Windows NT had fork from the start. Vide NtCreateProcess and what happens if an image file is not explicitly supplied.
I suspect it's a long tail sort of thing; it mostly doesn't matter except when it really matters. It's interesting that the stated motivation for the patch is in the context of agentic tools spawning subcommands. There's some related prior art in this area where the payoffs could be much greater, like fuzzing: https://gts3.org/assets/papers/2017/xu:os-fuzz.pdf is an example. It would be very interesting to see this patch applied to e.g. AFL++
That's not the reason for the performance difference. Windows does have a fork primitive (ZwCreateProcess) and it's still slower than Linux's equivalent.
Again, NtCreateProcess does not implement fork(). The fundamental characteristic of fork is that the child is an exact replica of the parent, down to the instruction pointer. Windows does not have a way to create a process object with such a configuration.
Also, using the Zw prefix doesn’t make you look more knowledgeable, it makes you look like you’re trying way too hard to borrow credibility.
This paper is great and I also really like one of its references [29] as it goes into some more subtle parts of scalable interfaces, including fork. It's a gem IMO: The Scalable Commutativity Rule: Designing Scalable Software for Multicore Processors https://people.csail.mit.edu/nickolai/papers/clements-sc.pdf
The zygote pattern[1] is a great optimization to deal with the cost of forking, but IMHO, being able to inexpensively spawn a carefully tailored process regardless of the size and scope of the current process would be better.
I would guess it would be a small difference in measurable performance between zygote and a direct clean spawn, but it's one less trick an application needs to do, and it would be very helpful for libraries that spawn things. Spawning inside a library isn't always a great thing to do, but some things would really benefit from process level isolation.
[1] In case one isn't aware, the zygote pattern involves forking a 'zygote' process during application startup, and having that process do any forks that need to happen during application runtime. This reduces the cost of forking in large applications, because the zygote will have few fds open and use little memory. This lets your large application spawn new processes without delaying the application or the startup of the new processes. Some applications will spawn many zygotes to allow parallelism for spawning at runtime.
You're referring to something else, and maybe I'm using the term "zygote" incorrectly.
In all uses of zygotes that I have seen, here's what's really happening:
- `fork` is being used to reduce the cost of starting a process that has a high start-up cost. So, you start one process, run it through the expensive initialization, and then fork it from there to start new processes.
- To make this even faster, you have a pool of pre-forked processes sit around.
- Having pre-forked processes sitting around ready to be used is not expensive because of the CoW property and the fact that a process that forks and then immediately pauses will not have triggered any significant CoW yet.
So, the zygote optimization you speak of is in practice only meaningful on top of systems that are using an optimization uniquely enabled by `fork` (avoiding process initialization costs by cloning a process), and that zygote optimization is further optimized by another property of `fork` (memory sharing of forked processes that haven't done anything else yet).
Oh I see. I guess your zygotes have developed more than mine. I think Google may have coined or at least popularized the term zygote for this in Chrome and Android, Chrome documentation [1] says:
> A zygote process is one that listens for spawn requests from a main process and forks itself in response. Generally they are used because forking a process after some expensive setup has been performed can save time and share extra memory pages.
I think reading the first sentance and stopping covers my zygote, but adding the second sentance covers yours. So I think we're both right!
I think both paths are useful. If your children need time to startup and become ready, spawn one that does start up work, and then it (pre)forks at the ready state to have processes ready to handle requests (your zygote). This does require a traditional fork() to avoid duplication of work.
But if forking is expensive at runtime because you have a million FDs open and a whole lot of memory allocations, spawn spawners before you start doing work (my zygote). This could be unnecessary with a inexpensive way to spawn a new process from an process that has lots of resources in use.
Of course, you can also use my zygotes to spawn your zygotes. Zygoteception.
I quite like the idea. I’m using OpenBSD on an oldish laptop, and fork-exec is expensive enough that it conflicts with the usb subsystem. Isochronous transfers have a 1ms realtime requirement and it seem that the fork-exec system calls hold the giant lock long enough to mess with it (audio stutters).
While I’ve not bothered to profile it, but it seems that process that have lot of mapped pages is the issue (firefox, emacs,…). In the emacs case, the issue is when the main process trying to fork-exec, if I start a shell session (with shell-mode or term-mode), it works fine.
The paper explicitly covers it that various memory COW/snapshot mechanisms are probably faster and safer than the zygote pattern. As it stands getting the zygote pattern correct and safe is something you have to plan for upfront. You can’t retrofit it which is why the paper mentions it has poor composability. Also the advantages of the zygote pattern can be overstated since the memory sharing benefit is minimal since it has to happen so early and modern OSes already transparently CoW duplicate pages in the background.
> fork() is a relatively expensive system call; it must copy the entire process state (including memory) for the child process. Many optimizations have been made over the years, but a fork is still a fundamentally costly operation. To make things worse, a fork() call is often immediately followed by an exec(), which will discard all of that memory that was so carefully copied for the child.
It's weird to leave out a mention of copy-on-write - the optimisation that means that you don't copy over all the memory.
This was left implicit in the article, but what they mean by copying the process state here is the memory management structures. That's mainly the page tables and the VMAs.
That means you have to allocate new pages to hold a copy of all these structures, even if the actual memory pointed by the pages is shared. And walking all those structures to make a copy is still costly.
Even with copy-on-write, fork() still has to pay the setup cost for COW. If the parent process has a lot of busy threads (e.g. Java), you can end up doing a lot of unnecessary COW before exec() fires.
It says state. Copy on write still means it's O(number of page table entries) even if you don't copy the contents. It's a well known issue that forking a program with large virtual memory size is slow.
I just ran into this recently, where I had an obscure bug caused by needing to close more file descriptors in the forked process. "I want a clone of the current process" is just way less common in my experience than "I want a completely new process". It feels crazy that we don't have a way to directly express the latter thing, and can only approximate it by cloning and then fixing things up in post.
But you generally want to communicate with that process, so you do need to setup e.g. file descriptors and stuff, which needs information from the parent process to be passed.
Yes, you do want to pass in some stuff. But by default you get every single open file descriptor and a copy of every single stack that any threads use for execution.
It shares way too much, and have huge use cases where it is really, really bad.
Most programming languages abstract this out to be able to connect or drop the 3 standard pipes. Typically this is the only thing that can be shared anyway unless the other program is specifically shared and expects other file handles to be available, in which case fork might be the right system call anyway.
A thing that makes that complicated is that while you want that conceptually, you don't want that in reality. For instance, if the spawning process is in a container of some sort and it spawned a process that "shares nothing with the process that spawned it", the spawned process would no longer be in that container, because the state of "being in the container" is one of the things it shares with the parent process.
This is just an example of I don't even know how many things a modern-day process will share from its parent.
By "complicated" I do not even remotely mean "unsolvable". I just mean that if you really dig down into what it means to "share nothing" in a modern operating system, it's a lot richer than it was back when fork+exec was a practical solution. There's a lot of fuzzy things that could go either way when you say "shares nothing".
There's a bunch of nastiness around that too. If you have e.g. library state that assumes the fd still works you can get her very confusing bugs once another file is opened into that fd number...
posix_spawn addresses the need from userspace. Under the hood, it's still doing more or less a fork/exec, with the baggage that comes with it. A syscall would be nicer.
When cores start needing more than 9 bits to be represented and RAM is in terabytes, many of the old assumptions need to change. Schedulers need to be implemented in userspace, RAM needs to be allocated in GB, not in 4k, io needs to require less round-trips between kernel and user space and NICs need to do a lot more work before the data reaches the CPU.
The elegance of the fork() + exec() model is that every kind of configuration can be done after the fork using all the usual APIs. Every attempt to replace it with a combined call that I have seen so far seemed fundamentally poorer because it needs to add all configuration options as parameters to the call and then do this in away that you can extend it later and does not become a mess.
I have the entirely opposite opinion. IMO a big mistake of the UNIXy model is that so much state is preserved across the creation of a process. For example, there are APIs to have a specific thing be fd number 4 so you can run a program and have it find that thing at fd 4. This is weird.
Windows, for all its many, many faults, did not use fork+exec and instead mostly has options for how one creates a process. It wasn’t done elegantly, but it was the right decision.
Well, a lot of the power of the UNIX shell comes form this and I see this as a major advantage over Windows. So no, I do not think Windows got it right.
Any kind of replacement should aim for the same conceptual simplicity and power. Sadly, I fear that people driving development nowadays are more interested in building unbreakable walled gardens for advertisement or app stores, or trying to squeeze down the some small gain when used on the cloud. I am more interested in general computing on the user side.
Having fd 4 mean something specific is no weirder than having fds 0,1, and 2 mean something specific, which is probably never going to change. At some point you just gotta embrace the Unix.
Actually, there is a native fork. There had to be, as POSIX personality support was a part of the Windows NT 3.1 design. What there wasn't was a Win32 form of fork. The Native API for Windows NT allowed it quite straightforwardly.
Is it weirder, that you can pass an variable precisely into argument 4? You do need to pass information to a subprocess and there needs to be some agreement on what means what. Sure, maybe you could use names instead of fds, but that sounds needlessly complicated.
A way to pass a defined list of handles to a subprocess (or a friendly other process) makes sense. Having that mechanism be direct inheritance of those handles with the same numbering as the source is obnoxious.
That’s like saying you could use positions to specify function argument access (as in assembly) instead of variable names. File descriptors being numbers that are likely array indexes in a file handle seems like a leaky abstraction. Having a namespace that a parent process share with its children seems like a much cleaner design.
You're simply failing to grasp the value of the simplicity, compatibility, and portability of POSIX/*nix. Inventing yet another way to create a process would be complex and break things. It's a-la-carte to enable configuration after fork of the new CoW or non-CoW process but before exec (unless vfork or similar were used). This is the model.
If you want to greenfield re-engineer the world with all new system calls and a totally different execution model, feel free to go right ahead.
"The reasonable man adapts himself to POSIX: the unreasonable one persists in trying to adapt the POSIX to himself. Therefore all progress depends on the unreasonable man."
The new system calls described in the article have an extensible declarative command interface built into them to do things like close or duplicate file descriptors. Not opposed to it but it definitely stood out to me.
I agree. I think the current way is very nice to use (in c). I think the best way would be to have something similar to vfork() but not bound by posix rules. Then make the normal posix apis (close, setuid, etc.) act like the Rust “builder” pattern. Possibly giving them a prefix for explicitness. That way the “fill out a giant structure” people could have their wish and the people that just want a faster posix experience don’t have to learn an entirely new concept and api surface. It would be future extensible that way, too (just add more prefixed calls to the builder).
Yeah. The right way to eliminate fork() is to make the usual APIs that modify process state take an explicit process handle, so the same APIs can be used to set up an empty process. They can also be composed in other ways, eg for IPC or debugging.
That's mostly papering over design mistake that most syscalls doesn't accept target pid. Otherwise you could just create suspended process, configure it with syscalls that explicitly take target pid, and start it.
Maybe, I am not saying fork() + exec() model couldn't be improved, but most people saying it is "terrible" and it needs to die seem to go on to propose something substantially worse.
i thought this was all fixed with special modes of clone that are optimized and don't actually copy anything (ie, it creates a new deficient process that can pretty much only exec)?
Fork always seemed conceptually terrible even when I first learned about it.. If you want to do one thing (start a process) you should not have to use a mysterious incantation that does a different unrelated thing (forks your process) in order to do it.
I am curious about what the best way to handle the example in the article of one process spawning many git subprocesses is. Surely it just doesn't make sense to repeatedly start git from scratch in the course of a long-running parent operation. What's the low cost abstraction for the same result, though?
libgit2 exists. You could imagine communicating with some gitd over a pipe/socket but I don't know why that would be a good idea. Short of that you have to spawn processes.
It is a weirdly common misconception that that fork() is cheap... it is O(N) on the size of the process, and it always has been.
Yes, it's copy on write... but there is a linear relationship between the size of the process and the number of page table entries required to represent it.
I'm not surprised Chen's patch was rejected; that's an extremely niche usecase not worth supporting. With my shell developer hat on, I agree with the closing "developers would likely welcome a native implementation that isn't (unlike the current implementation) hiding fork() and exec() under the covers".
The whole approach of using fork seems to be unnatural for me. In many cases (even in the majority of them) it's not needed to inherit the whole structure of the parent process, but to start a given executable. Windows does this better with its CreateProcessW interface.
These discussions were definitely had back in the 20th century too. The spawn model versus the fork+execve model has been an on-going debate since the time of MS/PC/DR-DOS.
There are a lot of slightly different fork-exec-like things in the concept space and it's hard to imagine one approach satisfying them all. IMO it would be interesting to take an approach analogous-ish to sched_ext_ops where you built the rough flow chart of a combined fork-exec, but with hooks built to enable ebpf to change behavior or skip the bits these sophisticated users don't want/need.
Fork/exec is great if you actually want the traditional copy of your process for some reason.
For launching something totally new, like the example in the article of some tool calling git, I think it does make a ton of sense to make something new.
Especially since I suspect that is by far the more common case. I suspect “I want a clone of me“ is relatively rarely used at this point.
I'm guessing that a big part of the problem with moving away from fork() in general is that each new process needs a copy of the parent process' environment anyway, right?
The LWN article is incorrect in saying that it "must copy the entire process state (including memory) for the child process". There are some kernel structures and page tables that need to be initialized, plus you need a new stack, but it's not nearly as dramatic as implied. Most of the parent's memory is "incorporated by reference", so to speak.
In fact, if you profile it, in the fork() + execve() model, execve() is far more expensive, because not only does it replace the old process with a new one, but it also involves running the dynamic linker, which opens, parses, and mmaps library files.
It still makes sense to get rid of the fork() overhead if you're going to throw away the cloned process state soon thereafter, but if you wanted to make process execution radically faster, rethinking the exec architecture would probably offer more significant gains.
The kernel does not copy every page, but it does have to copy all of the VMAs. Setting memory to COW (which can involve changing a lot of page-table-entries) is not free either. I guess I could have mentioned copy-on-write explicitly, but I do not believe that what I wrote was incorrect.
Fork becomes more and more expensive the higher the RSS of the process, roughly 1ms per 1Gb of the process size with 4kb pages. Given that modern servers can easily support 1-2Tb of RAM the fork() part can easily take several hundred milliseconds, blocking everything in the meantime. So for larger programs you kinda have to have a "fork helper" process if you need to execute external programs for some reason.
I'm a bit naive, but I don't think that's necessarily a requirement.
It might be commonly held convention, and thus, an assumption, in Linux (and, broadly, UNIX) but I don't think it's true inside VAX or even Windows, so I don't think it's a requirement.
Unless I've missed something (which is totally possible, this is not an area of OS design I've spent much time).
But also UID, groups, controlling TTY, process group, capabilities, pipes, shared memory, etc. and the file descriptors while maybe not inherently needed are how a lot of Unix plumbing works.
A lot of times you actively don't want the parent environment or any of the memory or file descriptors. And then you have to actively do work to fix all that stuff up after the fork.
This seems unnecessary to me. In the example, the core of git should be a library yo can link so you don't need to run the binary. That would be better in every way.
Launching git repeatedly was probably not the best example. But it's hard to think of good examples where launching processes repeatedly is the most performant thing to do, probably because launching processes had been expensive and everyone has learned to do something else (libraries, zygotes, etc). Maybe a different question is: if launching processes were cheap, is there something we would implement as processes instead of libraries?
I can recall just one program that's intentionally not implemented as a library, but I think people have since built a library on top of it:
But when you use a process, you get tons of things for free, the subtask is invoked in parallel, you get isolation and you can control execution for free. Unless you are already writing a multithreaded program or already accept passing objects in memory, using a process is actually easier to write than using a library.
If I use a library, I also need to start using threads and need to invent some core synchronization mechanism. I essentially are reinventing a small scheduler, when I already get this from the OS for free. Also know any crash in the third-party code will crash the whole program, the third-party code has access to the whole address space. With invoking a process you also have a standardized API implemented by the OS.
Maybe tangentially related but I always think it's silly that every linux process has the same libgcc_so.so.1 loaded into memory for each process even though the raw binary for the library is exactly the same so you end up with like 800 copies of libgcc_so.so.1 in memory.
I mean maybe this has been optimized for already and I don't know what I'm talking about but maybe someone with more knowledge about the kernel knows? Is this something we simply can't optimize for because of security implications?
Shared libraries (and mmapped files in general) are deduplicated; it's nowhere near as bad as you think. The kernel loads a .so into memory once and then maps that memory into every process that mmaps it.
Editing to add: this deduplication is one of the greatest upsides to dynamic linking. Common libs like libgcc and libc only have to exist in memory once and can stay in CPU caches, whereas if they were statically linked into every binary, each binary would have a copy of that library that wouldn't be shared with anything else and you'd waste a lot of memory.
How do you think position independent code can call functions from other .so's without being patched with their addresses?
They can't, so even PIC code still has to have a relocation table that gets patched. It's in a different page than the code though, so code does still get reused.
Typically libgcc_so.so is loaded by the linker, which uses an mmap call to map the binary into the address space.
> The kernel keeps track of which file is mapped where, and can detect when a request is made to map an already mapped file again, avoiding physical memory allocation if possible.
In Linux, when a shared lib is loaded by multiple processes, its loaded once and not duplicated in ram. Only if a memory page is modified by the process will the memory be duplicated. (Hope I have explained that correctly)
Those mappings by default all go to the same shared memory.
Unices have been sharing executable memory between processes longer than there's been mmap for user space to do the same thing themselves. I remember seeing it in the 2BSD kernel for instance.
I have a rule for myself. If I think something is silly or stupid, I assume I don't understand it. I usually find I do not understand it, and it no longer seems silly when I do understand it.
In this case too, you think it is silly because you don't understand it. Your assumptions are wrong, making it seem silly.
It can also mean that neither the hardware side or the software side is static, but change over time. That means that their demands and what they allow also change over time. This leads to the insight that what was perhaps a good idea on 70s hardware/software is not necessarily a good, or even ok, idea 50 years later on modern hardware executing OSes and programs that have been kept up to date.
> ABSTRACT
> The received wisdom suggests that Unix’s unusual combination of fork() and exec() for process creation was an inspired design. In this paper, we argue that fork was a clever hack for machines and programs of the 1970s that has long outlived its usefulness and is now a liability. We catalog the ways in which fork is a terrible abstraction for the modern programmer to use, describe how it compromises OS implementations, and propose alternatives.
> As the designers and implementers of operating systems, we should acknowledge that fork’s continued existence as a first-class OS primitive holds back systems research, and deprecate it. As educators, we should teach fork as a historical artifact, and not the first process creation mechanism students encounter.
No, it was done that way so that you could launch a program that was too big to fit in memory with the parent program. The original implementation worked by swapping out the forking program to disk on a fork() call. Then, at the moment the program was swapped out but control had not returned, the process table entry was duplicated and adjusted so that there were now two processes, one in memory and one swapped out. The one in memory then got control, and could do an exec() call.
This allowed large programs to run on small PDP-11 machines. It was needed back in the era of really expensive memory. That's why.
I agree that there should be non-fork primitives, I'm just not that sure that performance is the best argument.
Now these decisions aren't objectively bad, but they have significant trade-offs and it's probably not a good idea that they're forced simply because we use fork()+exec() for process creation.
At least on systems with virtual addressing. If you want to go into physical addressing, then yes, maybe it's a problem. But Linux will never touch anything with physical addressing, so I don't see what people are complaining about.
(Windows's fork is called ZwCreateProcess)
Traditionally Windows applications that create processes all the time come from UNIX heritage.
Contrary to UNIX, Windows NT was designed with threads first mentality, from the get go.
While on UNIX they were added after fact, and to this day there are gotchas mixing posix threads with signals, fork and exec.
Both systems are implemented using threads as the execution context, but in Unix, the history means that that you fork+exec most of the time, resulting in a two tasks that do not share memory any more. By contrast, on Windows (NT onward) the common case when creating a new execution context is to create a thread that shares memory with others in its process.
Both systems allow the easy use of the other's core abstraction. On Unix, you can either code like its 1986 and use fork without exec, or use clone(3) or any of its higher level abstractions like pthreads.
You're right that POSIX semantics get tangled when using threads.
* https://computernewb.com/~lily/files/Documents/NTDesignWorkb...
* https://computernewb.com/~lily/files/Documents/NTDesignWorkb...
Misread on purpose to make a point?
Also, using the Zw prefix doesn’t make you look more knowledgeable, it makes you look like you’re trying way too hard to borrow credibility.
https://news.ycombinator.com/item?id=19621799 - A fork() in the road (2019-04-10, 178 comments)
Hard to come up with an optimization that is equally efficient and elegant
I would guess it would be a small difference in measurable performance between zygote and a direct clean spawn, but it's one less trick an application needs to do, and it would be very helpful for libraries that spawn things. Spawning inside a library isn't always a great thing to do, but some things would really benefit from process level isolation.
[1] In case one isn't aware, the zygote pattern involves forking a 'zygote' process during application startup, and having that process do any forks that need to happen during application runtime. This reduces the cost of forking in large applications, because the zygote will have few fds open and use little memory. This lets your large application spawn new processes without delaying the application or the startup of the new processes. Some applications will spawn many zygotes to allow parallelism for spawning at runtime.
In all uses of zygotes that I have seen, here's what's really happening:
- `fork` is being used to reduce the cost of starting a process that has a high start-up cost. So, you start one process, run it through the expensive initialization, and then fork it from there to start new processes.
- To make this even faster, you have a pool of pre-forked processes sit around.
- Having pre-forked processes sitting around ready to be used is not expensive because of the CoW property and the fact that a process that forks and then immediately pauses will not have triggered any significant CoW yet.
So, the zygote optimization you speak of is in practice only meaningful on top of systems that are using an optimization uniquely enabled by `fork` (avoiding process initialization costs by cloning a process), and that zygote optimization is further optimized by another property of `fork` (memory sharing of forked processes that haven't done anything else yet).
> A zygote process is one that listens for spawn requests from a main process and forks itself in response. Generally they are used because forking a process after some expensive setup has been performed can save time and share extra memory pages.
I think reading the first sentance and stopping covers my zygote, but adding the second sentance covers yours. So I think we're both right!
I think both paths are useful. If your children need time to startup and become ready, spawn one that does start up work, and then it (pre)forks at the ready state to have processes ready to handle requests (your zygote). This does require a traditional fork() to avoid duplication of work.
But if forking is expensive at runtime because you have a million FDs open and a whole lot of memory allocations, spawn spawners before you start doing work (my zygote). This could be unnecessary with a inexpensive way to spawn a new process from an process that has lots of resources in use.
Of course, you can also use my zygotes to spawn your zygotes. Zygoteception.
[1] https://chromium.googlesource.com/chromium/src/+/HEAD/docs/l...
While I’ve not bothered to profile it, but it seems that process that have lot of mapped pages is the issue (firefox, emacs,…). In the emacs case, the issue is when the main process trying to fork-exec, if I start a shell session (with shell-mode or term-mode), it works fine.
It's called clone(2)
It's weird to leave out a mention of copy-on-write - the optimisation that means that you don't copy over all the memory.
That means you have to allocate new pages to hold a copy of all these structures, even if the actual memory pointed by the pages is shared. And walking all those structures to make a copy is still costly.
For the intended audience of such a paper this is base knowledge.
It shares way too much, and have huge use cases where it is really, really bad.
This is just an example of I don't even know how many things a modern-day process will share from its parent.
By "complicated" I do not even remotely mean "unsolvable". I just mean that if you really dig down into what it means to "share nothing" in a modern operating system, it's a lot richer than it was back when fork+exec was a practical solution. There's a lot of fuzzy things that could go either way when you say "shares nothing".
Isn't that what posix_spawn is for?
I do use threaded code. It's significantly harder to write and reason about. (45 years in to a CS career, ageing out)
You have to be clever to do better than clever people. Clever people bootstrapped me into fork()/exec() and I know my limits.
Windows, for all its many, many faults, did not use fork+exec and instead mostly has options for how one creates a process. It wasn’t done elegantly, but it was the right decision.
Any kind of replacement should aim for the same conceptual simplicity and power. Sadly, I fear that people driving development nowadays are more interested in building unbreakable walled gardens for advertisement or app stores, or trying to squeeze down the some small gain when used on the cloud. I am more interested in general computing on the user side.
* https://jdebp.uk/FGA/bernstein-on-ttys/cttys.html
Interestingly, on MS/PC/DR-DOS file descriptor 3 was stdaux. and file descriptor 4 was stdprn.
The Windows approach may be correct, but it suffers in performance from the POSIX perspective.
I have heard that WSL1 iimproves this.
Windows does not historically depend on fork(), so there was no native fork(), so Cygwin kludged it up.
If you want to greenfield re-engineer the world with all new system calls and a totally different execution model, feel free to go right ahead.
― George Bernard Shaw, probably.
I am curious about what the best way to handle the example in the article of one process spawning many git subprocesses is. Surely it just doesn't make sense to repeatedly start git from scratch in the course of a long-running parent operation. What's the low cost abstraction for the same result, though?
Yes, it's copy on write... but there is a linear relationship between the size of the process and the number of page table entries required to represent it.
I.e. a year that starts with 20, not 19.
For launching something totally new, like the example in the article of some tool calling git, I think it does make a ton of sense to make something new.
Especially since I suspect that is by far the more common case. I suspect “I want a clone of me“ is relatively rarely used at this point.
In fact, if you profile it, in the fork() + execve() model, execve() is far more expensive, because not only does it replace the old process with a new one, but it also involves running the dynamic linker, which opens, parses, and mmaps library files.
It still makes sense to get rid of the fork() overhead if you're going to throw away the cloned process state soon thereafter, but if you wanted to make process execution radically faster, rethinking the exec architecture would probably offer more significant gains.
It might be commonly held convention, and thus, an assumption, in Linux (and, broadly, UNIX) but I don't think it's true inside VAX or even Windows, so I don't think it's a requirement.
Unless I've missed something (which is totally possible, this is not an area of OS design I've spent much time).
I can recall just one program that's intentionally not implemented as a library, but I think people have since built a library on top of it:
https://dechifro.org/dcraw/#:~:text=Why%20don%27t%20you%20im...
If I use a library, I also need to start using threads and need to invent some core synchronization mechanism. I essentially are reinventing a small scheduler, when I already get this from the OS for free. Also know any crash in the third-party code will crash the whole program, the third-party code has access to the whole address space. With invoking a process you also have a standardized API implemented by the OS.
I mean maybe this has been optimized for already and I don't know what I'm talking about but maybe someone with more knowledge about the kernel knows? Is this something we simply can't optimize for because of security implications?
Editing to add: this deduplication is one of the greatest upsides to dynamic linking. Common libs like libgcc and libc only have to exist in memory once and can stay in CPU caches, whereas if they were statically linked into every binary, each binary would have a copy of that library that wouldn't be shared with anything else and you'd waste a lot of memory.
They can't, so even PIC code still has to have a relocation table that gets patched. It's in a different page than the code though, so code does still get reused.
> The kernel keeps track of which file is mapped where, and can detect when a request is made to map an already mapped file again, avoiding physical memory allocation if possible.
Relevant stack overflow answer: https://stackoverflow.com/questions/61950951/linux-shared-li...
Unices have been sharing executable memory between processes longer than there's been mmap for user space to do the same thing themselves. I remember seeing it in the 2BSD kernel for instance.
In this case too, you think it is silly because you don't understand it. Your assumptions are wrong, making it seem silly.
Every couple of years, someone claims they have "the solution" implying everyone else who came before them didn't know what they were doing.