My idea of HVAC is that it should be "set and forget", so "smart" is the polar opposite of what I want. The round Honeywell on the wall has been doing its job for the past few decades, and will likely last many more with only an occasional cleaning.
If you have same schedule every week, don't go on vacation, your kids don't have breaks, don't have seasons, then 'set and forget' dumb thermostat will work for you without any problems. For the rest of us we need some 'smartness' in our thermostats.
Isn’t this is only true with central air though? Most other types of ac are not full climate solutions to leave running all the time and need some manual control.
At least that’s how I use the mini split in my garage. I have to remember to give it 15-20 minutes headstart before I use the garage or will be really hot.
For anyone wondering why he would ever do this, it seems to be a type of hidden mini-split system used in euro-style shoebox flats, with a super-proprietary thermostat. Wi-Fi capability is an option at additional cost, but was not purchased.
In the USA, wired thermostats tend to use standardized 24V wiring schemes, or 208V/240V for mains voltage heaters (electric heat, common on the west coast, especially in shitty apartments, central hot water/steam heating with 24V controls is more common on the east coast).
I had this same control panel in Australia. The actual AC unit was part of the strata common property and I think somehow shared between multiple units on the floor.
Apologies for the Claudish, especially if anyone wades through the blog posts. I cringe when I reread them, but having some documentation on a working system is better than the ~none I was publishing before.
I’ve been working on a similar setup using the M5Stack NanoC6 and AtomS3 Lite, and put together a parts list and wiring guide on my site: https://serin-labs.com/parts.html.
I also built a web flasher with firmware configured for those boards, so you can install directly from your browser without any fiddling or configuring. The ESPHome option uses the same echavet/MitsubishiCN105ESPHome project mentioned in the article. I also included a YAML generator for that project so you can more simply customize the config. There are also separate firmware options for HomeKit and Matter.
https://serin-labs.com/flash.htmlhttps://serin-labs.com/esphome/generate-yaml.html
I run Serin Labs and sell assembled kits and the cable separately.
For anyone with City Multi, P series, or M series systems with a branch box, you may also be interested in a multi zone controller I’m developing: https://serin-labs.com/multi-zone-controller.html. It connects to the system’s communication bus, allowing one device to control all zones without needing a CN105 adapter at each indoor unit. It also exposes operating data such as refrigerant pressures, temperatures, power, compressor frequency, and fault codes, with everything running locally. Software is still in development.
Does anyone know if this could be used to "cap" the AC settings ? It could be useful in an airbnb place, where I want to limit the lowest (e.g. 18 degres Celsius) or hottest (e.g. 22 degres Celsius) the guest can set the AC.
I'm hoping to get a mini-split system installed soon and thought I might as well look for something with HA integration. It's not easy. Some manufacturers like Samsung actually want to charge you monthly for cloud integration! Completely out of the question obviously. I came across this, and Mitsubishi is supposed to be good anyway. I would prefer something that's actually supported but I can't seem to find any other options.
I could also very easily wire my units in so no need for WiFi. Maybe I can find a wired ethernet module.
My ideal system would be something that does matter over thread with zero external internet access. Matter over thread devices are all standardized so no proprietary app required, and the newer iphones have a thread radio built in so you can control them without even a hub.
At least that’s how I use the mini split in my garage. I have to remember to give it 15-20 minutes headstart before I use the garage or will be really hot.
In the USA, wired thermostats tend to use standardized 24V wiring schemes, or 208V/240V for mains voltage heaters (electric heat, common on the west coast, especially in shitty apartments, central hot water/steam heating with 24V controls is more common on the east coast).
Apologies for the Claudish, especially if anyone wades through the blog posts. I cringe when I reread them, but having some documentation on a working system is better than the ~none I was publishing before.
I also built a web flasher with firmware configured for those boards, so you can install directly from your browser without any fiddling or configuring. The ESPHome option uses the same echavet/MitsubishiCN105ESPHome project mentioned in the article. I also included a YAML generator for that project so you can more simply customize the config. There are also separate firmware options for HomeKit and Matter. https://serin-labs.com/flash.html https://serin-labs.com/esphome/generate-yaml.html
I run Serin Labs and sell assembled kits and the cable separately.
For anyone with City Multi, P series, or M series systems with a branch box, you may also be interested in a multi zone controller I’m developing: https://serin-labs.com/multi-zone-controller.html. It connects to the system’s communication bus, allowing one device to control all zones without needing a CN105 adapter at each indoor unit. It also exposes operating data such as refrigerant pressures, temperatures, power, compressor frequency, and fault codes, with everything running locally. Software is still in development.
I could also very easily wire my units in so no need for WiFi. Maybe I can find a wired ethernet module.